House numbers numeral 1 in “Style D” (western) font

Size Standard 5" Number *Special 7" Number*
Clear selection
SKU: HNSD-1 Category:


Hand forged house number one in font Style D

Font Style D is really a western font that reflects a rustic look.  These numbers look great on homes with natural wood siding and are great for mounting on that one of a kind mailbox too!   These are not your ordinary house numbers!

  While most house numbers are made overseas and stamped out of thin gauge material then painted, ours are cut from heavy 3/8″ iron plate and hand forged in our blacksmith shop in Winthrop Washington.  Each number is a truly unique forging with a hand hammered finish.  The numbers are then drilled and heavy tumbled for an hour.  Finally, the numbers are given two coats of lacquer, front and back to preserve and protect the natural finish of the iron.  No black paint is ever used.  We pride ourselves on the unique hand finished quality of an American Blacksmith made forged house number.

 The above number comes complete with our etched and blackened screws at no charge!

100% Satisfaction Guaranteed!  If you are not totally satisfied with any of our items they may be returned for a full refund.

We also offer the number in a large 7″ tall version too and keep them in stock.  Special sizes and lettering is also available upon request by contacting us through our contact page.

Contact Us

This number “1” in the standard 5″ size is 5″ tall and 1-1/4″ wide.
The weight is 7oz.

The special 7″ number is 7″ tall and 1-3/4″ wide.

Both sizes are made from 3/8″ thick iron plate, so the thickness of the numbers is 3/8″

The free blackened screws are #10 x 1-1/4″ long.

Helpful Mounting Tips:

Mounting Screws
For most all cases the screws we provide free of charge with your order will work fine for wood, metal, synthetic and most home siding. These are specially blackened and waxed #10 x 1-1/4″ screws designed to complement your new numbers. You will receive two screws for each number ordered.

Masonry Mounting
In situations where you would like to mount the numbers on stone, masonry, stucco or brick we suggest using masonry inserts like what is shown on the right. This kit is available from most home improvement stores like Home Depot and Lowe’s. The kit shown is Home Depot store SKU # 424956 and cost less than $10. For mounting the house numbers to any surface we recommend using blue painters tape to layout a level horizontal stripe as a guide for the bottom of each number, then position the bottom of the number on the tape and mark the holes for the first number. You can also mark the tape to represent the edge of the number so you can equispace the distance between each number. The basic measure twice, drill once philosophy. Remember you can always contact us with any questions.


There are no reviews yet.

Please help us out and review “House numbers numeral 1 in “Style D” (western) font”

We would love to see a picture of your new numbers! Use the SELECT FILE button to upload an image.

Additional information

Weight N/A
Dimensions N/A

Standard 5" Number, *Special 7" Number*

Matching Numbers…